Video Surveillance Best Home Security Camera

Network camera Features :

1/2.8″ Hi3516CV300+SONY290 CMOS sensor 2.0mp 1080P@25fps, Starvis

Compatible with Hikvision Private Protocol

Smart Low Illumination; Smart ROI(4 ROI region)

Free P2P; ONVIF2.4; BLC; 3D-DNR; DEFOG; DWDR

Support auto IR-CUT filter removal function/ICR

Support: Milestone, NUUO, AXXON, igifort,avigilon

Scenarios：

Apply to roads, warehouses, underground parking and other place which required definition picture quality.

Specification:

Company News:

New 5MP IP Camera solution: HiSilicon3516D+ Omnivision OS05A10

On Aug.18, 2017, Wodsee release new 5MP IP Camera solution: HiSilicon3516D+ OmniVision OS05A10, which is to replace Hi3516D+OV5658.

OmniVision OS05A10 is new released versatile 5-Megapixel PureCel® Sensor with High Dynamic Range for a Wide Range of Commercial Security and Consumer Applications by OmniVision.

Details please visit http://www.ovt.com/sensors/OS05A10

Why Wodsee new release Hi3516D+ OS05A10 ?

Please check below Advantages:

1. Sensor size: OS05A10 Big

1/2.7” OVOS05A10 COMS Sensor, image will be more clear and lifelike.

1/3” OV5658 CMOS Sensor

2. TF card: OS05A10 up to 128G

OVOS05A10 Sensor, add TF Card slot, max support 128G TF card

OV5658 Sensor, add TF Card slot, max support 32G TF card

3. The Number of CCD Board Layer: OS05A10 only 1 layer

OVOS05A10, match with DSP Hi3516A/Hi3516D, only 1 layer of CCD board.

With Motorized zoom lens, only 1 layer, too.

Small case/housing is also available with 5MP High Megapixel. 

OV5658 Sensor, match with DSP Hi3516A/Hi3516D, 2 layers of CCD board.

With Motorized zoom lens, only big Dome and Bullet camera case/housing are available.

4. Image quality: OS05A10 color image, more clear; Balck&White image, more clear; support HDR function

More Technical Specification and price info of Hi3516A+OS05A10, please contact [email protected]

FAQ: 

1.What areas can network video monitoring apply to?

Mainly used in road monitoring, residential & community monitoring, Internet bar monitoring, education, health care, energy, safe city and other industries and home users.

2.What is Highlight Compensation (HLC) ?

Highlight compensation is a feature that came out of necessity due to overexposure from strong light sources like headlights or spotlights. This feature senses strong sources of light in video and compensates for exposure on these spots to enhance the overall quality. HLC is very helpful in preventing blinding of security cameras at night time from headlights.  License plate readability is a feature nearly everyone wants and expects from their security cameras placed in parking lots and entry points. Without HLC this is something that is simply impossible due to the bright, glaring nature of headlights. With the type of HLC provided in most security cameras these days it is possible to reduce the glare in video to an extent and make it possible to see license plates on slow moving front approaching vehicles or stationary vehicles. But if license plate capture is a feature you are in need of for vehicles moving faster than 5mph we advise using actual license plate capture cameras that are specifically designed for this purpose and will perform better because they have other features in addition to HLC that aid in plate capture. One such feature is shutter rate control.

3. What are the types of storage provided by the network video surveillance system?

The front-end storage is to store the video recording in the hard disk of the DVR. The center store stores the video recording on the central platform’s video server. The video storage is stored in the DVR’s own hard disk. The supported hard disk display or the disk storage supported by the network storage; the client store stores the video recording in the client’s browser to monitor the disk in the machine

4. How does the network video surveillance system support alarm linkage and video recording at the same time?

Alarm linkage in general can be divided into front-end alarm linkage, platform alarm linkage, the client alarm linkage. Alarm event triggered by the sound, light, electricity and other alarm output device in the front of the direct output of the alarm message can also trigger the front of the alarm video; platform to receive alarm information can trigger the platform after the alarm linkage: send the alarm message and customer mail, linkage Center video; client received an alarm signal can be immediately reflected in the client’s interface to the customer that an alarm event occurred.

5.What is the direction of monitoring system development?

The monitoring system will develop to the network, in fact, there are more and more monitoring system to implement the network transmission, some industry insiders believe that the possibility of wireless is relatively small, because any signal can interfere with the wireless monitoring equipment to receive the results, if To strengthen the signal is necessary to consider whether and mobile phones, wireless walkie-talkie to apply for a separate frequency to communicate. The question is the operator who does it? How is the system expanded after the band? These problems will hinder the development of wireless.

Another part of the industry believe that wireless should dominate the future of the network, monitoring will be to the wireless development. Now a lot of internal LAN to the wireless, the network will be a combination of wireless and wired development, the future of monitoring based on the network should also be a combination of wireless and wired development.

1).Web camera universal network camera to provide users with a very rich feature, it integrates a network server, image compression and operating system, anywhere on the network, and even anywhere in the world connected to the Internet can be seen through the standard web browser Images, companies can not use the traditional camera needs coaxial cable to re-network, thus saving a lot of money. For more monitoring systems, professional security software is installed to manage the video signals sent back from the camera. Relative to the wireless camera, its transmission in the performance and distance have certain requirements, more difficult to base on the market.

2).The advantages of the network

The growth of IT and traditional security technologies has made it possible for network technology to be used in monitoring systems, providing more and better security management options.

Network video technology that allows people to remotely monitor Internet coverage anywhere. Network cameras and video servers can be connected directly to the network. The video signal is digitally processed in the camera and transferred to the PC server via a computer network for storage. This is very useful, because the computer network can generally be used, LAN and Internet applications also makes the video signal can be remotely managed and stored. Viewing the monitor image from the web substantially reduces the cost of being traveled to and from the site being monitored. In addition, the image is safe and measurable for storage at a remote site for convenience.

Network video technology also allows users to retain their analog devices and enjoy the full benefits of digital systems. Web recording can control the existing computer architecture, network and monitor, the installation cost is cheaper. In addition, the maintenance fee is reduced, the number of movable parts is reduced, greatly reducing the need for equipment replacement. So its ownership (TOC) is low.

It is precisely because of the maturity of the network technology and monitoring system development needs of their own, making the monitoring system to the network development direction. Compared to the wireless network that is not yet widely used, its advantage is self-evident.

WODSEE is one of the best WIPS20-AAT30 IP Surveillance Camera IP Camera App support Starvis H.265/H.264 IP Camera manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.